You Should Know The Many Ways To Check Tire Pressure With Silic

  •   When preparing for a road trip or commuting, it is very important to check the tire pressure of the vehicle. However, many people do not know how to check tire pressure without a gas test gauge. It is important to know the many different ways to check tire pressure because not everyone can easily use a pressure gauge.

      Why should I check the tire pressure? And how to check tire pressure without a pressure gauge

      Low tire pressure may cause many adverse effects on your vehicle and journey. It will reduce the mileage and cause your vehicle to emit more fuel. This will cause you to stop more gasoline, which is a waste of time and money.

      Low tire pressure can also cause dangerous accidents. When the tire pressure is low, the tire will bear more weight and pressure, which will cause the tread to shorten for less time than usual. A short tire tread will cause the tire to leak air. In the worst case, it may cause the tires to explode or separate, thereby causing you to lose control of the vehicle.

      Overinflation of tires is also dangerous. They reduce traction and make it easier to slide on the road, especially when it is wet. They can also make your journey bumpy, resilient, and loud. Low- and over-inflated tires are dangerous for long-distance driving and highway driving.

      You should know the many ways to use gauge tools to check tire pressure. Here are some tips to keep in mind during the journey.

      1. hand pressure

      If you leave the pressure gauge manufacturer's pressure gauge at home, please don't panic. You can also check the tire pressure by hand.

      Push your hand down onto the tire. If the tire feels soft and slippery, the tire pressure is low. If the tire feels hard, it means you can't push the tire down at all, it means the tire is overinflated.

      If the tire feels too low, inject some air into the tire while holding it in your hand. Continue to push down to feel the tire pressure. If the tires are over-inflated at the beginning, let a small amount of air out of the tires at a time and check that the tires are soft while driving. You should be able to push the tire down slightly.

      2. Eyeball method

      This method requires a certain amount of practice, patience, and expertise. It is difficult to check the tire pressure by visual inspection, but it can be done.

      First, park the vehicle on a flat surface. Then, look at the tires of the vehicle from the front and rear of the vehicle within a certain distance. Look from the sides of the vehicle to see if part of the tire is sticking out, even just a little bit. This indicates that your tire pressure is low. Add air to the tire until the tire is hard but not rigid.

      3. Check PSI

      Each car is equipped with standard tires PSI or pound-force per square inch. This lets you know the pressure that the tire can withstand. This information can usually be found in the driver’s manual, or at the bottom of the inside of the driver’s side door. This number is usually the lowest PSI recommended for tire inflation. However, you can lower or increase PSI as needed.

      For example, many cars and minivans have a recommended PSI between 27 and 32, but these tires can reach 40 if needed. The PSI of pickup trucks and SUVs is 4 to 10 PSI larger than the PSI of small vehicles. Depending on the model, the recommended PSI for the front and rear tires of some vehicles is different.

      4. Check the goods

      Depending on the amount of cargo your vehicle is transporting, the rear tires may be heavy. If one side of the vehicle is heavier than the other, add some air to the rear tires to balance the weight distribution. After unloading the cargo, just make sure to let some excess air make the PSI back to normal.